#IP ADDRESS FOR NETGEAR ROUTER WNDR3400 HOW TO#
#IP ADDRESS FOR NETGEAR ROUTER WNDR3400 INSTALL#

I too was a bit perplexed as to how to accomplish this great feat of dd-wrt firmware installation. Good luck with your install, and welcome to the dd-wrt family. Please read, and re-read the entire post completely. If youвЂ™re still unsure how to complete the dd-wrt firmware installation, then you may want to give my guideДЄ good read over, and choose the course you deem warranted.

#IP ADDRESS FOR NETGEAR ROUTER WNDR3400 INSTALL#

To this post, to make this guide easier to find for noobs looking to install dd-wrt onto their Netgear WNDR3400 v1 router.ДЇirst off, start with the Peakcock link if you havenвЂ™t already. I copied and pasted my 'how to' from a previous post

If you return to the LAN setting, you will see that the settings have been saved.Posted: Mon 9:01 Post subject: NETGEAR WNDR3400 v1 dd-wrt Firmware Install. Wait a few moments and if all goes well, you will have access to the network and to the Internet (if applicable).

To begin, use a computer connected to the Netgear router and go to the address ''.Д®nter the default password, then go to : Advanced -> Configuration -> LAN Settings.ДЇinally, change the IP address by the desired IP adress (for exemple : 10.0.0.1) and click 'Apply.'ДЄs stated, if the subnet mask (and therefore the IP address class) changes, you need to run a command prompt (cmd) and type the commands 'ipconfig /release' then 'ipconfig /renew' to, again, access the network. A small network interruption occurs during the update.Дў. Secondary DNS and third: those of Google (for example). Primary DNS: The IP address of your parent router (where are the addresses of the DNS servers of your ISP, for example). If you want, in the 'Domain name server address (DNS)', you can specify the addresses of the DNS servers that will be send to the network devices (computers, smartphones. In our case, the LAN IP address of the box, is 192.168.1.1 The IP address of the gateway is the IP address of the parent router (for exemple : the box). The subnet mask varies depending on the IP address class (IP class C : .x / Mask : 255.255.255.0, IP class A : 10.x.x.x / Mask : 255.0.0.0) Static IP address to give to your Netgear router (the IP address must be in the same class as the IP address of the gateway) In 'Internet IP Address', select 'Use static IP address' and enter the following information :

The possibility that we will use.ДЇor this, use a computer connected to the Netgear router and go to the address '.' Go into the Netgear router to set the IP address to use. So your router will always receive the same IP address. Go into the parent router (for exemple : the box) to set a static IP address for your router. To change the WAN IP (external IP) address of the router, you have 2 options : If you connect it to a modem, the external IP address is the Internet IP address assigned by the ISP. Important : This is only possible when you connect the router on a router.

Change the LAN IP address of the routerДЎ.

Change the WAN IP address of the router.

Here's a little schema that will explain the concept of internal and external IP address : When you first use your Netgear router, his internal IP will be changed if it is in conflict with the IP address of another router on the network. The internal IP address of the router is defined in the concerned router. By default, a router has two IP addresses: the LAN (internal) address and the WAN (external) address.Д«y default, the external IP address of the Netgear router is automatically assigned by your modem / router (or box) or by the router on which you plug it.

Ip address for netgear router wndr3400